The Vortex Energy Filter®: Complete Guide to Whole Building Protection

Of all the products Dr. George T. F. Yao engineered during his decades of research, the Vortex Energy Filter® may be the most important for the modern home. It is the only device in the Pulsor® family designed to protect an entire building at once, filtering the subtle energy content of the electrical supply that feeds every wire, every outlet, and every device in your home. If you do nothing else for EMF protection, this is where to start.

The Vortex Energy Filter® is Dr. Yao's answer to a problem that the ancient Feng Shui masters could never have anticipated: a world in which every building is wired with conductors that carry not only 60 Hz power but also a hidden cargo of subtle electromagnetic energy, much of it counterclockwise (negative) in its vortex spin and harmful to the biological systems of everyone living inside.

How the Vortex Energy Filter® Works

The operating principle of the VEF is straightforward, even though the physics behind it represents some of the most advanced subtle energy science ever applied to a consumer product. Every electron flowing through your building's electrical wiring carries a scalar potential, and as Whittaker proved in 1903, every scalar potential contains hidden internal wave structures. These hidden structures carry the subtle "inner EM" energy that can be either beneficial (clockwise, positive vortex spin) or harmful (counterclockwise, negative vortex spin).

The VEF is plugged into the electrical system so that current flows through it. As electrons pass through the proprietary microcrystal matrix inside the filter, their subtle energy content is processed. The counterclockwise (negative) vortex energy components are filtered out through phase conjugation. The clockwise (positive) vortex energy components are passed through and, in some cases, amplified. The electrons emerge on the other side carrying predominantly positive subtle energy, which then propagates through every wire and device connected to the filtered circuit.

The normal electromagnetic function of the electricity is completely unaffected. Your devices still receive the same voltage, the same current, the same frequency. The VEF does not alter the outer electromagnetic energy at all. It only changes the hidden inner electromagnetic content, the subtle energy layer that standard instruments cannot measure but that your body's Vortex Energy Polarity Centers® interact with continuously.

Installation

Dr. Yao designed the VEF for simplicity. Installation requires no electrician, no tools, and no technical expertise.

The most efficient way to use the VEF is to plug it into an electrical power supply outlet, preferably one closest to the fuse box or the breaker box. This position allows the filtered energy to propagate through the maximum amount of your building's wiring.

At the other end of the VEF, connect it to a multiple outlet power strip. Plug your electrical appliances into this power strip. Make sure the total wattage of the connected appliances does not exceed 1,625 watts, which is the maximum rating of the Vortex Energy Filter®.

There is one critical step that many people overlook: connect an electric clock or a low wattage night light to the power strip as well. This ensures a constant trickle flow of electrons being processed through the VEF at all times, even when your other appliances are turned off. This constant trickle flow enables the VEF to maintain a clockwise (positive) vortex energy field throughout the vicinity continuously, around the clock.

How Many VEFs Does One Need?

Each household or apartment should have at least one unit. For most homes, a single VEF positioned near the breaker box and connected to a power strip with a constant trickle load provides significant improvement to the building's overall subtle energy environment.

However, additional units may be required for specific high demand systems. Dr. Yao recommended separate VEF units for computer controlled security systems, high power stereo systems, large screen home theater television sets, microwave ovens, and commercial refrigerators. These devices either draw significant power or operate with electromagnetic characteristics that benefit from dedicated filtering.

When in doubt about whether an additional unit is needed, a practitioner with an Acu-Pulsor® Spin Tester can evaluate the vortex polarity of the energy in different areas of your building to determine whether the single VEF is providing adequate coverage or whether supplementary units would be beneficial.

Typical Installation Setup

A typical Vortex Energy Filter® installation places the VEF between the wall outlet (power in) and a surge suppressor/power distribution strip (filtered power out). Connected to the power strip are the computer, printer, WiFi router, and a low wattage night light for constant trickle flow. The VEF processes all power flowing to these devices, smoothing the subtle energy content before it reaches the equipment and, more importantly, before the Poynting energy flow from the wiring radiates into the room where the operator sits.

This setup protects both the equipment and the operator. The equipment receives cleaner subtle energy, which some users report extends component life and improves performance stability. The operator works within a filtered electromagnetic environment where the dominant subtle energy is clockwise (positive) rather than the counterclockwise (negative) energy characteristic of unfiltered electronic smog.

The VEF in Combination With Other Pulsor® Products

The Vortex Energy Filter® addresses the building's electrical system, but a complete protection strategy often includes additional Pulsor® products. The VEF can be used in conjunction with Pulsor® Cards placed on cell phones, tablets, and laptops (which receive their electromagnetic signals wirelessly, not through the building's wiring). Body Pulsors provide personal protection that travels with you outside the filtered building. The Aura Bath technique supports the body's own subtle energy system maintenance.

Together, these create a layered defense: the VEF handles the building's electrical environment, the Cards handle close range wireless devices, and the body Pulsors protect the individual's personal energy system regardless of location. This comprehensive approach reflects Dr. Yao's understanding that subtle energy protection needs to address multiple pathways simultaneously.