Metal Implants and EMF Protection: What Dr. Yao Discovered

Throughout Miracle of Microcrystals ©, Dr. George T. F. Yao returned again and again to a foundational principle: all metallic objects act as antennas which collect and radiate disorienting energy waves and can alter the natural polarities of the biophysical body. He applied this principle to everything from electrical wiring and water pipes to watches, rings, keys, and belt buckles. But there is one category of metallic object that deserves special attention because it cannot be removed at the end of the day. That category is surgical metal implants.

Hip replacements, knee replacements, spinal rods, plates, screws, pins, dental fillings, and pacemakers. Millions of people carry metal inside their bodies as the result of necessary medical procedures. Each of these implants, in Dr. Yao's framework, functions as an internal antenna, continuously collecting electromagnetic energy from the environment and reradiating it directly into the surrounding tissues, organs, and energy centers.

Why Internal Metal Is Different from External Metal

When you wear a metal watch or carry keys in your pocket, the metallic object collects electromagnetic energy and reradiates it into the space near your body. This is disruptive to the bioplasmic energy fields, but the object is external. You can clear it with a Pulsor®, and you can remove it entirely when you want to. The conflicting energy it introduces has to penetrate through the auric field to reach the physical body.

A surgical implant is different in every respect. It sits inside the body, embedded in bone and tissue, in direct physical contact with the biological systems it is affecting. There is no auric buffer between the antenna and the body. The conflicting electromagnetic energy collected by the implant is reradiated directly into the local tissue environment, where it interacts immediately with the cellular energy systems, the local vortex polarity patterns, and the primal energy circuits that pass through that region of the body.

Dr. Yao noted that even external metallic objects as small as dental fillings can alter the body's energy fields. A metal filling in a tooth acts as a tiny antenna in the head, one of the most energetically sensitive regions of the body. The effect is measurable with a pendulum and observable in the disruption of energy flow patterns. Larger surgical implants, such as hip or knee replacements that contain substantial amounts of metal, create a proportionally larger effect.

Dr. Yao's Specific Technique for Metal Implant Relief

Dr. Yao dedicated a specific section of his application techniques to pain relief for persons with metal implants in the body. His primary method is direct and immediate: stroke the painful area with a Red Pulsor®. He documented that pain, neuralgia, or discomfort caused by a metal implant or an unbalanced charge condition may be temporarily relieved through this simple application.

He then recommended that these persons should wear the Pulsor® continuously to prevent further absorption of disorienting waves from the environment. This is important because the metal implant does not stop acting as an antenna. It collects electromagnetic energy constantly, as long as it remains in the body. Continuous Pulsor® protection maintains the body's natural energy flow pattern despite the ongoing collection and reradiation by the implant.

Dr. Yao also described a more thorough method for clearing the accumulated charge. Hold a Pulsor® in the left hand and place it over the affected area while dipping the right hand in a bucket of water. The water acts as an energetic ground, absorbing the conflicting energy that the Pulsor® draws out of the implant site. The water should be changed frequently during the process.

An alternative version of this technique uses a pendulum instead of the water bucket. Hold a pendulum in the right hand and place it over a bucket of water. The pendulum will swing clockwise or counterclockwise, oscillating back and forth as it processes the conflicting energy. When all movements of the pendulum come to a standstill, the area has been cleared. Then, with the Pulsor® still in the left hand, move it around the affected area to restart the pendulum's motion and continue clearing any remaining disharmonious energy. Dr. Yao noted that the used water should be disposed of carefully.

Dental Fillings and Dental Work

Dr. Yao listed dental fillings among the metallic objects that should be cleared with Pulsor®. Metal amalgam fillings, crowns, bridges, and orthodontic hardware all act as antennas within the oral cavity. Because the mouth and jaw region sits at the junction of multiple energy pathways and is in close proximity to the brain centers, the energetic effect of dental metal can be disproportionate to its physical size.

Clearing dental fillings with Pulsor® follows the same principle as clearing any other metallic object. A single pass of a Pulsor® over the teeth and jaw area neutralizes the accumulated conflicting charge. For ongoing protection, wearing a Pulsor® on the body ensures that the dental hardware does not continuously accumulate new disorienting energy from the environment.

Pacemakers and Electronic Medical Devices

Dr. Yao referenced pacemakers specifically in his discussion of how stray electromagnetic fields can interfere with electronic instruments. He noted that electromagnetic pollution gives false signals to other electrical instruments so that they in turn start behaving abnormally or even stop working altogether, and among these instruments can be a pacemaker implanted in patients with a cardiac condition.

This observation underscores why Pulsor® is fundamentally different from electromagnetic shielding products. Shielding devices attempt to block or redirect electromagnetic energy, which can potentially interfere with the operation of sensitive medical electronics like pacemakers. Pulsor® does not interact with electromagnetic energy at all. It works with the bioplasmic energy fields of the living system, maintaining the body's natural vortex polarity patterns without generating any electromagnetic signal that could interfere with medical devices.

This passive, non electromagnetic nature of Pulsor® makes it uniquely suitable for persons with electronic medical implants. It provides energetic support without any risk of interfering with the device's function.

The Cumulative Effect of Living with Internal Metal

For a person without metal implants, the body's exposure to conflicting electromagnetic energy comes primarily from external sources: household electronics, WiFi, electrical wiring, and the ambient electromagnetic environment. These sources are significant, but the body's auric field provides a natural first line of interaction before the conflicting energy reaches the physical tissues.

For a person with metal implants, there is an additional internal source that bypasses this natural buffer entirely. The implant collects energy from the external environment and reradiates it from within. Day after day, year after year, this internal reradiation adds a layer of electromagnetic stress that people without implants do not experience.

Dr. Yao's observation that there is a fifteen to twenty year biological delay time before manifestation of drastic biophysical changes from reversed vortex energy fields gives particular weight to the importance of continuous protection for people with long term implants. The effects may be subtle at first, but they accumulate over time.

A Practical Protocol for Implant Patients

Based on Dr. Yao's research and techniques, a practical protection protocol for people with metal implants includes three components.

First, continuous personal protection. Wear a Pulsor® on the body at all times, in a shirt pocket, as a pendant, or positioned near the implant site. This maintains the body's natural energy flow patterns and reduces the ongoing accumulation of conflicting energy from the implant's antenna effect.

Second, periodic clearing of the implant site using the direct Pulsor® application or the water discharge technique. The frequency of this practice depends on the individual's electromagnetic environment and the size and location of the implant.

Third, comprehensive home protection. Treating the electrical panel, water lines, and major appliances with Pulsor® reduces the total electromagnetic energy available for the implant to collect. A cleaner home environment means less conflicting energy reaching the implant, which means less internal reradiation for the body to contend with. See our Room by Room Home Protection Guide for the complete approach.

Dr. Yao did not develop these techniques as alternatives to medical care. Surgical implants serve vital medical purposes, and his work never suggested otherwise. What he provided was a complementary approach to supporting the body's energy system in the presence of internal metal, addressing a dimension of the implant experience that conventional medicine does not recognize and has no tools to measure.